How Do You Know When It’s Time For an Oil Change? - Approval Team Canada - Under New Management
Something Great
Is Happening

How Do You Know When It’s Time For an Oil Change?

Every driver should pay particular attention to the oil change, as it is responsible for lubricating and cooling the internal parts of the engine, allowing smooth and efficient operation of the vehicle.

One of the best ways to ensure the optimal operation of your vehicle is to drain the oil regularly according to the manufacturer’s recommendations.

Failure of the lubrication system may be noticed by extraneous noise, overheating, starter failure, power loss, and increased fuel consumption.

To know when to change the oil, the car itself gives some common signs.

Low oil level

This is often the case in older cars with high mileage, as most cars burn small amounts of oil through engine operation.

When the level is low, it means that the oil has been active in the engine for a long time, so it is vital to change the oil of the car.

Dirty Oil

The more the oil is used, the more it will degrade, becoming darker in color, even reaching a black color.

When the oil is new, it has a light honey color. When checking the oil, if the dark color is observed, it is time to change it.

Mileage

The dirty oil causes greater wear of the motor, thus reducing the life of the same. So the more the mileage increases, the more it is certain that the oil change is approaching.

Oil indicator light

Many cars, especially the newer models, have this option of an oil alert light, which stays on when you need to change the oil by low level or dirt.

START TODAY!

WE’LL APPROVE YOU FOR THE VEHICLE YOU WANT!

How to choose the oil?

Know that there are essential differences between the quality of oils. Semi-synthetic oils are the most used, but in some cases, you will have to use a 100% synthetic oil, or mineral oil.

Its viscosity and specification are two factors that  can help in understanding the quality of fuel:

RR

Viscosity: At startup, it takes several seconds for the oil to lubricate all moving parts and must, therefore, move quickly. Its circulation time is related to its cold viscosity grade.

An international standard defines the different oils by two numbers separated by the letter W (e.g., 5W40): the smaller the first number, the colder the oil is and the higher the second digit, the more viscous the oil will be at high temperature.

RR

Viscosity: At startup, it takes several seconds for the oil to lubricate all moving parts and must, therefore, move quickly.

Its circulation time is related to its cold viscosity grade.

Leave a comment